F r No. Name Descriptions ” No. Name Descriptions 1] Charging Port Reserved for Micro USB cable. 1] OBD-16 Diagnostic Connect to the vehicle's OBDII DLC port. 2 USB? Port Connect to VCI, USB devices or add-on modules (Scopebox, Sensorbox or Batterybox). 2 Mini USB Port Connect to the tablet via the USB cable. 3 DC-IN Interface Connect to the included power adaptor. 4 Reset Switch Reset the tablet. 3 Connector Mode Indicators ° GREEN: The VCl is connected to the Phoenix Pro via the USB cable. °_ BLUE: The VCI is connected to the Phoenix Pro via Bluetooth. °__RED: The VClis plugged into the vehicle's DLC port. LL D, 5 Volume +/- Key Adjust the volume.
6 Ethernet Port Connect to the crossover cable for wired network. Operation Introduction 1 Earphone Port Connect to the earphones 1. Network Setting 1.1 Wi-Fi Connection TOPDON Phoenix Pro adopts built-in Wi-Fi module for wireless network. On the android system home screen, tap [Settings] -> [Wi-Fi]. In Off mode, hold it for 3 seconds to turn the tablet on. In On mode: 8 9 Power/Screen Lock Ke wer/ y Memory Card Slot *_Holdit for 3 seconds to turn the tablet off. . *_Holdit for 8 seconds to perform forced shutdown. *_ Press it to activate the LCD if the LCD is off. *_ Pressit to turn off the LCD if the LCD is on. Wireless & networks Insert a memory card for memory extension.
D WiFi » Bluetooth O Ethernet Q Data usage More 10 | HDMI Port Connect to an external projector or monitor with HDMI interface. Device © oispay A Sound& notification E Storage s Battery S Ars 2. VCI Connector (for 12V cars only) Personal 9 Location ê Security a Accounts @ Language & input Select the desired Wi-Fi connection until "connected". * Note: The tablet will automatically connect to the available previously linked network. 1.2 Wired Connection Connect the Ethernet cable to Phoenix Pro directly. On the android system home screen, tap [Settings] -> [Ethernet], and slide the switch to on. 2.
Registration For initial use, the registration is the necessary first procedure to activate the Phoenix Pro. Tap [Login] on the upper right corner of the screen: