Q: The diagnostic cable is not powered on when connected to the vehicle. A: EN Q: Can I use other chargers to charge the tablet? A: No, please use the original charger provided by TOPDON. Any damage and economic loss caused by using the improper battery charger will not be our responsibility. Q: How to save the battery power? A: Please switch off the screen while the tablet is idle, or set a short standby time, or reduce the brightness of the screen. Q: Are there non-standard OBDII adapters in the box? A: Yes. Q: Communication error with vehicle ECU? A: Please confirm whether the ignition switch is ON.
Or send your vehicle’s year, make, model, and VIN data to us via the “Feedback” feature for timely technical assistance. Q: Failed to get access to the vehicle’s ECU system? A: Please confirm the following cases: • • Whether the system is available in the vehicle. • • Whether the diagnostic cable is correctly connected. • • Whether the ignition switch is ON. Q: Error of the diagnostic software. A: Tap “Feedback” to send specific problems to us for technical support. Tap the vehicle software icon and hold it to uninstall the corresponding software, and then enter the upgrade center to download and install a new version. 39 Possible Cause Solution Poor contact of the diagnostic cable.
Please replug the diagnostic cable. Poor contact of the vehicle diagnostic seat cables. Please check whether the diagnostic pin is normal. The battery of the vehicle is under power. Please replace the accumulator.