Control Panel LED Attendance Messages (continued) Continuable, Service, and Accessory Errors More detailed information in the form of a secondary error message is available for each of the following three types of errors. The first entry in each of the following tables shows the primary error LED pattern. The remaining entries in each table illustrate the secondary error messages. The tables also contain information from the Status Log that typically appears in the Status Log area of the Self Test / Configuration Page. Table 6-3.
Secondary Information about Continuable Errors C4170-90959 Troubleshooting with Control Panel Messages 97 Control Panel LED Pattern Error message Recommended Action Attention The printer requires attention for one of the following reasons: a door is open the toner cartridge is missing paper is jammed in the printer Pressing the GO button causes the printer to attempt to clear the paper jam. It may be necessary to clear the jam manually and push GO or close the top cover. Control Panel LED Pattern Error message Status Log Code Recommended Action Continuable Error. Pressing the GO button causes the printer to attempt to recover from the error and print whatever it can.
If the recovery is unsuccessful, the printer will return to the continuable error state. (Primary Error Message) Press the GO button and continue printing, or press the GO and JOB CANCEL buttons simultaneously to view the secondary information. Memory Overflow (20 error) / Mem Full (Secondary Error Message) 30016 Press the GO button to print the transferred data (some data might be lost), then instruct the customer to simplify the print jobs or install additional memory.