Figure 3-4 HP LaserJet 2100 JetDirect Configuration Page 1 General Information lists the HP JetDirect number, firmware revision, LAN hardware address, selected port, manufacturing ID, I/O card status, and network statistics (unicast packets, total packets, bad packets, framing errors received, packets transmitted, unsendable packets, transmit collisions, and transmit late collisions). 2 Protocol Information lists TCP/IP status and configuration, the HP Web JetAdmin server name, Novell NetWare status and configuration, AppleTalk status and configuration, and DLC/LLC status. Continuous Self-Test To initiate a continuous self-test, first turn the printer power off.
After the power is off press and hold the G O button. Turn the printer power back on and continue to hold the G O button for 15 or more seconds (after 15 seconds all of the LEDs turn on). The continuous self-test begins once the G O button is released (anytime after 15 seconds). When the G O button is released, the LEDs cycle one after another. As the continous self-test pages print, the Ready LED blinks. The printer prints self-test/configuration pages until either the J OB C ANCEL button is pressed or the printer power is cycled. C4170-90959 Using the Control Panel 47