EPSON — Procedure Outline for Connecting through an Access Point

User's Guide Connecting the Printer to the Smart Device or Computer ❏ Simple AP Mode In this mode, the printer acts as an access point and you can connect up to four devices to the printer without having to use a standard access point. However, devices directly connected to the printer cannot communicate with each other through the printer. There are two ways to connect to the printer from a smart device; Wi-Fi connection and Wi-Fi Direct connection. The printer can be connected by Wi-Fi and Simple AP mode simultaneously. However, if you start a network connection in Simple AP mode when the printer is connected by Wi-Fi, the Wi-Fi is temporarily disconnected.

❏ Wi-Fi Direct Mode You can establish a one-to-one connection between the printer and a smart device. Since the network connection is disconnected in Wi-Fi Direct mode, this type of connection should only be used as a temporary measure. Your smart device must be Wi-Fi Direct capable. See the manual provided with your smart device for details. Related Information & “Procedure Outline for Wi-Fi Direct Connection (Simple AP Mode)” on page 57 Connection Settings Between the Printer and a Smart Device Procedure Outline for Connecting through an Access Point Connect the printer to the access point by Wi-Fi, and then connect the smart device to the same network (SSID).

Make the following settings in order. Making Wi-Fi Network Settings from the Printer's Control Panel Make Wi-Fi settings from the printer's control panel to set up the Wi-Fi and connect to the access point. 44