EPSON — Making Wi-Fi Network Settings from the Printer's Control Panel

User's Guide Connecting the Printer to the Smart Device or Computer 7. Check the settings, and then press the OK button. 8. Select whether or not you print a network connection report after finishing the settings. Note: If you fail to connect, load plain paper, and then press the x button to print network connection report. Connect the smart device to the same network as the printer.

Related Information & “Messages and Solutions on the Network Connection Report” on page 67 & “Connecting the Smart Device to the Same Network as the Printer” on page 57 & “Adding Computers” on page 73 Making Wi-Fi Settings by Using Push Button from the Control Panel You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions are met, you can set up by using this method. ❏ The access point is compatible with WPS (Wi-Fi Protected Setup). ❏ The current Wi-Fi connection was established by pressing a button on the access point. Note:

If you cannot find the button or you are setting up using the software, see the manual provided with the access point. 48