User's Guide Connecting the Printer to the Smart Device or Computer 7. Press the OK button. The screen automatically proceeds after a specific length of time if you do not press the OK button. 8. Press the OK button. The screen automatically closes after a specific length of time if you do not press the OK button. Note: If an error screen is displayed, make network settings again. Connect the smart device to the same network as the printer.
Related Information & “Messages and Solutions on the Network Connection Report” on page 67 & “Connecting the Smart Device to the Same Network as the Printer” on page 57 & “Adding Computers” on page 73 Making Wi-Fi Settings by Using PIN Code from the Control Panel You can automatically connect to an access point by using a PIN code. You can use this method to set up if an access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point. 51