EPSON — Additional Connections for a Smart Device

User's Guide Connecting the Printer to the Smart Device or Computer 4. Select the printer name you want to connect to. If the connection is successful, the remaining ink/toner levels are displayed. Changing the Connection Method Between the Printer and the Smart Device Follow the steps below to change to the connection method you want to use. When changing to Wi-Fi, make sure that the smart device is connected to the same Wi-Fi network as the printer. See the manual provided with your smart device for instructions on making network settings.

When changing the connection method from Wi-Fi Direct mode to Simple AP mode, connect the printer and smart device in Wi-Fi Direct mode and run Web Config. Change the Connection Mode to OFF or Simple AP from Advanced Settings > Services > Wi-Fi Direct .

Related Information & “Procedure Outline for Connecting through an Access Point” on page 44 & “Procedure Outline for Wi-Fi Direct Connection (Simple AP Mode)” on page 57 & “Connecting the Smart Device to the Printer Directly by Wi-Fi Direct (for Android Only)” on page 60 & “Connecting the Smart Device and Printer by Wi-Fi Direct Mode (for Android Only)” on page 61 & “Checking the Connection Using Epson iPrint” on page 63 Additional Connections for a Smart Device 1. Access the following website, and then enter the product's model number. http://epson.sn 2. Go to Setup , and then run Download or Connect as necessary. 65