User's Guide Connecting the Printer to the Smart Device or Computer Replacing or Adding New Access Points If the SSID changes due to the replacement of an access point, or an access point is added and a new network environment is established, reset the Wi-Fi settings. If the SSID changes, you can use the same setup procedure as changing the printer connection. Related Information & “Changing the Printer Connection to Wi-Fi” on page 69 Changing the Printer Connection to Wi-Fi Changing to a Wi-Fi Connection - Windows The following is an example of when the print port is set as EpsonNet Print. 1. Connect the computer to the SSID for the access point that you want to connect to. 2.
Access the following website, and then enter the product's model number. Note: If the computer cannot connect to the Internet, see the page in this manual that explains what to do when you cannot connect to the Internet. http://epson.sn 3. Go to Setup , and then download the software. 4. Run the software, and then follow the on-screen instructions. 5. Select Change the connection method only on the Select Software Installation screen. 69