HP-335 Nov. 1998 NOTE A B C D E F G H I J K L M N O P Q R S T U V PAB3 ANALOG PHANTOM includes the following PWBs. 71011878 PAB3 INLET 100/117V 71011867 FRONT JACK BOARD ******** PAB3 EQ BOARD ******** PAB3 ANALOG BOARD NOTE :PAB3 ANALOG BOARD includes the following partts. 22195975 TR HOLDER 22195973 POWER AMP HOLDER 01349990 WIRING W4 01349978 7x250-P2.0-PH-SAN-F 01349912 12x130-P2.0-PH-SAN-F 01346423 HEATSINK 01346412 PAB HOLDER NOTE PAB3 FRONT JACK BOARD includes the following parts. 01344545 JACK HOLDER NOTE PAB3 INLET 100/117V includes the following parts.
23425740 AC INLET INL-8 10A/125V 2P PO 12559444 FUSE 5x20 SB 4 4A/125V 00129367 INLET HOLDER Replacemant INLET BOARD ""PAB3 INLET ASSY"" is for 100/117V version exclusive use. When using ""PAB3 INLET ASSY"" for 230/240V version, be sure to make the following modifications. 1. INLET BOARD FOR 100/117V version differs from 230V version in FUSE system. Replace fuse(F1 on INLET BOARD) to specific one.(#12559550 FUSE 5x20 S506 1.6A T1.6AL250V for 230V version)See TABLE A. 2. For safety standards, place fuse seal (#40013712 FUSE SEAL T1.6AL250V #407) at the proper place of the INLET BOARD. The location of fuse seal is over the following printing (see fig A) of the PWB.
When necessary, please order fuse seal separatery from INLET BOARD. TABLE A View from components side. 71011856 PAB3 ANALOG PHANTOM 22 FRONT JACK, ANALOG ,INLET ) 100V/117V FUSE 5x20 SB 4 4A/125V 230V/240V FUSE 5X20 S506 1.6A T1.6AL250V Fig.A 3.15A/125V