order they are received. If Nesting is Off, the files are printed as soon as possible, in the order they are received. If Nesting is On, files are printed when the time-out period expires or there are enough files to fill a page width. You can reprint files which have already been printed. See also page 29, Avoiding Paper Waste by Nesting Pages . • You can send pages to the printer without waiting for the current page to finish printing. • Pages are stored in the queue in the order they are received. • You can manipulate the pages in the queue, for example prioritizing them and reprinting them.
• You can use nesting, the printer’s paper- Managing Pages that have Not Yet been Printed 25 Managing Pages that have Not Yet been Printed Queueing and nesting are only available on the HP DesignJet 800 Series. (On the 500 Series, you can obtain reprints if an accessory card is installed; see page 22). Change the Queueing setting by selecting Queue On or Off from the Job Management To change the Nesting setting, see page 30, Turning Nesting On and Off . If the printer is turned off with unprinted files in the queue, the files are lost and must be resent. When Queueing is On and the printer receives print files, the files are stored in the queue in the With Queueing Turned ON ( ) menu.