The printhead alignment procedure requires paper to be loaded, and will take several minutes to perform. You can start the procedure yourself, for example, after clearing a paper jam, as follows: 3 Choose either Standard (which will take about 4Ѕ minutes, and which is recommended for normal use) or Special (which takes about 1 From the main front-panel menu, select Ink 2 Select Align Printheads and press Enter . System ( ) and press Enter . Aligning Printheads 42 Replacing Printheads After the replacement of the printheads, the printer checks that they are all functioning correctly; this may take several minutes.. You will see the front-panel message “HP No.
11 printheads successfully installed”. Then the printhead alignment procedure starts, see the next section. 12 Finally close the window.