– Try installing extra memory in your printer— extra memory is installed on the formatter (accessory) card, for PostScript or HP-GL/2, that is installed at the back of the printer; – Check the software settings for the page size. – Check the printing area in your software and that on the printer; don’t forget any margins; – Check the media orientation assumed by your software; check the → Page format → – Try installing extra memory in your printer’s formatter card (see above).
– Check the interface cable between your computer and the printer; • The image is clipped Rotate option; Unexpected or Wrong Output 11 • Check that the Processing HP-GL/2 or Processing PS messages in the front panel are as you expect them to be. • Ensure that your printer understands the graphic language you use. See → Graph. Lang . – Try changing the → Graph. Lang setting. – Don’t press Cancel or Form Feed and Cut before all the data is received by the printer; – Try increasing the → I/O Setup → I/O Timeout setting or any timeout setting in your network software; Unexpected or Wrong Output • The output contains only a partial print • The print is completely blank Typical problems are: