software. See → Color settings → Color / monochrome → Color / Grayscale / True black . – These options are available only on the HP DesignJet 800 Series, or if you have an HP-GL/2 accessory card installed in your HP DesignJet 500 Series printer; – Try installing extra memory in your printer’s formatter card (see page 11); • The printer produces a black-and-white print when you expected a color print – Check the front-panel Color/monochrome setting, and the equivalent setting in your – The printer cannot rotate raster images. • Page format or Rotate does not work Unexpected or Wrong Output 13 • One image overlays another on the same sheet Timeout setting.
(This normally does not apply to HP-GL/2 printing.) – Do you expect software-driven pen settings? – Have you changed the setting in the front panel but this has been ignored because the driver setting has not been changed. – Try reducing the → I/O Setup → I/O HP-GL/2 settings → Define palette ? Check that the palette is selected in → HP-GL/2 settings → Palette . Check that → HP-GL/2 settings → • Pen settings seem to have no effect – Have you changed them in → Palette is set to Software .