Configuring a Named Method List SUMMARY STEPS 1. enable 2. configure terminal 3. yang-interfaces aaa authentication method-list named-method-list 4. yang-interfaces aaa authorization method-list named-method-list 5. exit DETAILED STEPS Procedure Model-Driven Programmability Configuring a Named Method List Command or Action Purpose Device(conf-ssh-pubkey-data)# end • Use no hostname command to return to the default host. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode.
Step 3 yang-interfaces aaa authentication method-list named-method-list Example: Device(config)# yang-interfaces aaa authentication method-list authn-method Configures a named method-list for authentication. Step 4 yang-interfaces aaa authorization method-list named-method-list Example: Device(config)# yang-interfaces aaa authorization method-list authr-method Configures a named method-list for authorization. Step 5 exit Example: Device(config)# exit Exits global configuration mode and returns to privileged EXEC mode. Programmability Configuration Guide, Cisco IOS XE 17.16.x 186