Example: Device# show platform software yang-management process confd : Running nesd : Running syncfd : Running ncsshd : Running dmiauthd : Running vtyserverutild : Running opdatamgrd : Running nginx : Running ndbmand : Running Note The process nginx runs if ip http secure-server or ip http server is configured on the device. This process is not required to be in the running state for NETCONF to function properly. However, the nginx process is required for RESTCONF. Table 13: show platform software yang-management process Field Descriptions Example:
Named Method List Along with the default method-list, you can enable multiple authentication or authorization options with the named method-list. Method lists enable one or more security protocols to be used for authorization. The method lists are processed serially by the Cisco IOS software. If the first configured method-list fails, the next one is processed. This process continues until a successful authentication or authorization, or until all configured methods are exhausted. The following example shows how to configure named method-lists for NETCONF AAA: Device> enable Device# configure terminal Device(config)# netconf-yang Model-Driven Programmability Example:
Named Method List Field Description confd Configuration daemon nesd Network element synchronizer daemon syncfd Sync from daemon ncsshd NETCONF Secure Shell (SSH) daemon dmiauthd Device management inteface (DMI) authentication daemon vtyserverutild VTY server util daemon opdatamgrd Operational Data Manager daemon nginx NGINX web server ndbmand NETCONF database manager Programmability Configuration Guide, Cisco IOS XE 17.16.x 189