cisco IOS XE 17.16.x — Feature Information for NETCONF and RESTCONF Service-Level ACLs

Feature Information for NETCONF and RESTCONF Service-Level ACLs The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn . An account on Cisco.com is not required. Table 16:

Feature Information for NETCONF and RESTCONF Service-Level ACLs Model-Driven Programmability Feature Information for NETCONF and RESTCONF Service-Level ACLs Feature Name Releases Feature Information NETCONF and RESTCONF Service-Level ACLs Cisco IOS XE Everest 16.11.1 You can configure an access control list (ACL) for NETCONF and RESTCONF sessions. Clients that do not conform to the configured ACL are not allowed to access the NETCONF or RESTCONF subsystems. The following commands were introduced or modified:

netconf-yang ssh access-list and restconf access-list This feature is supported on all platforms that support NETCONF and RESTCONF Programmability Configuration Guide, Cisco IOS XE 17.16.x 246