cisco IOS XE 17.16.x — Configuring AppHosting for the ThousandEyes Enterprise Agent

Configuring AppHosting for the ThousandEyes Enterprise Agent SUMMARY STEPS 1. enable 2. configure terminal 3. app-hosting appid application-name 4. app-vnic AppGigabitEthernet trunk 5. vlan vlan-ID guest-interface guest-interface-number 6. guest-ip ip-address netmask netmask 7. exit 8. exit 9. app-default-gateway ip-address guest-interface network-interface 10. nameserver# ip-address 11. app-resource docker 12. run-opts options 13. prepend-pkg-opts 14. end DETAILED STEPS Procedure Application Hosting Configuring AppHosting for the ThousandEyes Enterprise Agent Command or Action Purpose Step 1 enable Example: Device> enable Enters privileged EXEC mode. Step 2 configure terminal Example:

Device# configure terminal Enters global configuration mode. Step 3 app-hosting appid application-name Example: Device(config)# app-hosting appid appid 1keyes Configures an application and enters application-hosting configuration mode. Step 4 app-vnic AppGigabitEthernet trunk Example: Device(config-app-hosting)# app-vnic AppGigabitEthernet trunk Configures a trunk port as the front-panel port for an application, and enters application-hosting trunk-configuration mode. Step 5 vlan vlan-ID guest-interface guest-interface-number Example:

Device(config-config-app-hosting-trunk)# vlan 10 guest-interface 2 Configures a VLAN guest interface and enters application-hosting VLAN-access IP configuration mode. Programmability Configuration Guide, Cisco IOS XE 17.16.x 446