Appendix-1 Transferring project data by using a media device Even if NB-Designer is not available, project files can be transferred by using a media device. **NB-Designer is required for screen conversion. 4-2-2 Uploading the project from the existing NB -> Go to A-1-1 4-5-2 Downloading the project to the NB-V1 -> Go to A-1-2 These functions are described in the following sections. 27 A-1-1 Uploading by using a storage media 1. Insert the USB memory device to use for the upload into the computer. 2. Enter the System Setting Mode following the procedures below. (1) Set both the DIP switches SW1 and SW2 on the back side to ON.
(2) Press the Reset switch, restart the NB Unit, and then it enters into the System Setting Mode. 3. Touch the USBHMI button. *Uploads the user project file required by the PT operation to the USB memory.