Table 7.1 (continued) 45 Mode Description {t1–t3} – the decrease in the value of the counting register (impulse appears at the counting input 2); t2 – moment of switching of output 2 in case of coincidence of values of the counting register and setpoint 2; t4 – moment of switching of output 1 in case of coincidence of values of the counting register and setpoint 1 NOTICE If the setpoint is set as zero, it is considered to be disabled, and the counter does not use it. Individual count (inP = 4) Input functions: Input 1 – count 1, Input 2 – count 2, Input 3 – reset, Input 4 – block