Quick reference guide SMS6ZCW37Q | Bosch (EN)

8 Programmes

en *9001631050* Quick reference guide Dishwasher Tip: 1. 2. 9001631050 (020401) SMS6ZCW37Q 1. ore using for the first time, read the instruction manual and the safety information it contains. ting up Home Connect Overview of water hardness settings rogrammes Connect your appliance to a mobile device. You can con- ently change all settings using the Home Connect app. stall the Home Connect app on your mo- ile device and follow the instructions. can the QR code with the Home Connect pp. he programme data has been meas- red in the laboratory according to uropean standard EN 60436. he consumption figures depend on e programme and additional func- on selected.

he runtime will change if the rinse d system is switched off or rinse aid eeds to be added. ogramme 1) Duration [h:min] 2) Energy [kWh] 3) Water [l] 1) 2:25 - 2:30 2) 1,150 - 1,250 tensive 70° 3) 10,5 - 13,5 1) 1:40 - 2:40 2) 0,680 - 1,300 uto 45-65° 3) 7,0 - 15,5 1) 3:55 2) 0,747 o 50° 3) 9,5 1) 1:40 - 1:45 2) 0,750 - 0,800 ass 40° 3) 11,1 - 13,7 1) 1:00 2) 1,280 press 65° - 1h 3) 10,2 1) 0:35 1 2) 0,710 press 45° 3) 10,5 1) 2:10 2) 1,350 achine Care 3) 15,0 1) 0:15 - 0:15 2) 0,050 - 0,050 vourite 3) 4,0 - 4,0 half standard load w to use your appliance oad the tableware. tate freely. 4. Select the programme. 7.

To cancel the programme, press for nly clean tableware that is suitable for dish- 2. Add detergent. 5. Start the programme ⁠. approx. 4 seconds. ashers. Remove large remnants of food from 3. Switch on the appliance ⁠. 6. Remove the tableware at the end of the pro- The programme is cancelled and ends after ap- e tableware. Check that the spray arms can ro- gramme. prox. 1 minute. 50 25 15 ml ml ml

Стр. 1

12 Troubleshooting

Cleaning filters Cleaning spray arms Clean wastewater pump 1. After each wash check the filters for 4. Press the locking residue. catches to- 2 2. Turn the coarse gether and lift 1 filter anticlock- 2 the coarse filter wise and re- out ⁠. move the filter system ⁠. 1 5. Clean the filter elements under running water. 3. Pull down the mi- 6. Re-assemble the filter system. cro filter to re- 7. Insert the filter system into the appliance move. and turn the coarse filter clockwise. Make sure that the arrow markings match up. 1. Unscrew the upper spray arm and pull down to remove ⁠. 1 2 2. Pull up the lower spray arm to remove. 3.

Check the outlet nozzles on the spray arms for blockages un- der running water and remove any foreign bodies. 4. Insert the lower spray arm. a The spray arm clicks into position. 5. Insert the upper spray arm and screw it firmly in place. 1. Disconnect the appliance from the power supply. 2. Remove the filter system. 3. Scoop out any water. 4. Prise off the pump cover using a spoon and grip it by the crosspiece. 5. Lift the pump cover inwards at an angle and remove. 6. Remove any remnants of food and foreign bodies in the area of the impeller. 7. Insert the pump cover and press down ⁠. 2 a The pump cover clicks into position. 1 8. Install the filter system.

Troubleshooting Fault Cause and troubleshooting Fault Cause and troubleshooting Fault Cause and troubleshooting E:32-00 will light up al- Supply hose is kinked. E:92-40 will light up al- Filters are soiled or blocked. Removable streaks are Amount of rinse aid to be dispensed is set too high. ternately or indicator for ▶ Install the supply hose without kinks. ternately. ▶ Clean the filters. present on glasses, glass- ▶ Set the rinse aid system to a lower setting. water supply lights up. ware with a metallic ap- Water tap is turned off. E:61-02 will light up al- Wastewater pump is blocked. No rinse aid has been added. pearance and cutlery. ▶ Turn on the water tap. ternately.

▶ Clean the wastewater pump. ▶ Add rinse aid. Water tap is jammed or furred up. Cover of the wastewater pump is loose Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often ▶ Turn on the water tap. ▶ Secure the cover of the Wastewater pump so it clicks into more severely affected. The flow rate must be at least 10 l/min when the water sup- position. ▶ Use rust-resistant tableware. ply is open. Remnants of food on Tableware is placed too close together or basket is overfilled. Cutlery may also rust if washed together with rusting items. The filters in the water connection of the supply or AquaStop tableware. 1.

Arrange tableware with sufficient space in between. ▶ Do not wash rusting items. hose are blocked. The spray jets must reach the surfaces of the tableware. Detergent residue is Spray arms were blocked by tableware so detergent was not 1. Switch off the appliance. 2. Avoid points of contact. present in the detergent rinsed out. 2. Pull out the mains plug. Spray arm rotation is blocked. dispenser or the tablet ▶ Check that the spray arms are not blocked and can rotate 3. Turn off the water tap. ▶ Arrange tableware so that it does not obstruct spray arm ro- collecting tray. freely. 4. Unscrew the water connection. tation. All LEDs light up or flash Electronics have detected a fault. 5.

Remove the filter from the sup- Spray arm nozzles are blocked. or the rinse programme ▶ Press the main switch button for approx. 4 seconds. ply hose ▶ Clean the Spray arms. does not continue run- The appliance is reset and restarted. ning. Filters are soiled. ▶ Clean the filters. Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly. 6. Clean the filter. 2. Engage the filters. 7. Re-insert the filter in the supply hose. Washing programme selected too weak. 8. Screw the water connection back on. ▶ Select a more intensive washing programme. 9. Check the water connection for leaks. ▶ Adjust the sensitivity of the sensors. 10.Restore the power supply.

11.Switch the appliance on. 2

Стр. 2