Introduction C:\Program Files (x86)\AVEVA\AVEVA Edge 2020\Redist\WinEmbedded\Bin\CEServer.exe Remote Agent for Windows Embedded Compact is located at: C:\Program Files (x86)\AVEVA\AVEVA Edge 2020\Redist\WinCE 5.0\ processor \Bin \CEServer.exe …where processor is the type of processor used by the target station. For more information, see the manufacturer's documentation. b) Copy the Remote Agent program file to the target station, either by downloading it over the network connection or by transferring it on a removable storage device (e.g., a USB flash drive). You can save the file anywhere on the target station, as long as it is in persistent storage but not in the root folder.
c) Configure Remote Agent to run automatically on startup. On most Windows Embedded Compact devices, you can do this by creating a shortcut to it in \Windows \Startup . If this does not work on the target station, see the manufacturer's documentation. d) Open Remote Agent, or restart the target station so that Remote Agent runs automatically. The Remote Agent window is displayed. e) In the Remote Agent window, note the host name or IP address of the target station. f) Do not close the Remote Agent window. Remote Agent needs to be running in order for you to be able to connect to it. 3. Use the Remote Management tool to connect to the target station: a) On your computer, open AVEVA Edge 2020.
b) On the Home tab of the ribbon, in the Remote Management group, click Connect . The Remote Management dialog box is displayed. c) Under Target Station , in the Host box, type the host name or IP address of the target station. Page 23