4 Mounting 4.1 Installation of device in housing Н For installation of the device perform following actions: 1. Fasten the bracket on the surface intended for mounting with three M4 Ч 20 screws (see Figure 4.2 ). NOTICE Screws for bracket are not included in the package. 2. Hook the fixing bracket from the back panel of device to the upper edge of the wall bracket. 3. Attach device to the bracket with the supplied screw. Demount the device in the reverse order. NOTICE Remove the cover before wiring. Fasten the base of the device to the bracket with a supplied screw. Figure 4.1 – Installation of wall-mounting device 11