Table A.1 (continued) 58 Parameter name and designation Modbus address Modbus function Write / Read Hash- code Format, data size Range of values and indication Factory settings NOTICE * After reaching the setpoint the output is switched for a time period, that is specified in parameteres t1 and t2, the count value is reset and the counting continues from zero (parameter SPM = RESET).
Time period for output 1 t1 0×0010 0×0011 0×06, 0×10 / 0×03 0×2E75 Unsigned long (4 bytes) from 0 to 999990 ms 1000 ms Time period for output 2 t2 0×0012 0×0013 0×06, 0×10 / 0×03 0×436C Unsigned long (4 bytes) from 0 to 999990 ms 1000 ms Decimal point position multiplier FDP 0×0014 0×06, 0×10 / 0×03 0×6ABF Word (2 bytes) 0 (————) 0 1 (———.-) 2 (——.–) 3 (—.—) 4 (–.——) 5 (-.———) Multiplier F 0×0015 0×0016 0×06, 0×10 / 0×03 0×3085 Unsigned long (4 bytes) from 0.00001 to 99999 1 Position of the decimal point DP 0×0007 0×06, 0×10 / 0×03 0×B3EB Word (2 bytes) 0 (————) 0 1 (———.-) 2 (——.–)