AS Series Operation Manual Select RTU Mapping Enable checkbox to enable the function of connection between RTU module and AS series module. Set the update cycle in Cycle box and a timeout in Timeout box. It means a timeout when RTU does not give a reply within the timeout set. The data mapping between each group of RTU-EN01 and AS series module is set in the RTU Mapping section. RTU- EN01 and I/O module connected to it are set via DCISoft. For more information on DCISoft, refer to the operation manual. Select RTU1 Enable to enable this RTU function. You can set each RTU individually. Set a station address and an IP address.
Set the RX mapping address and RX mapping length to make the digital input points for the DI module connected to RTU and mapped to X/M devices, as well as the length for the AS Series module. Set the RY mapping address and length to set the digital output points for the DO module mapped to Y/M devices, as well as the length for the AS Series module. Set the RCR Read mapping address and RCR Read mapping length to make the analog input points for the AI module connected to RTU and mapped to D/SR devices, as well as the length for the AS Series module.
Use the RCR Write mapping address and length to set the analog output points for the AO module mapped to D/SR devices, as well as the length for the AS Series module. _8 8-36