AS Series Operation Manual 6. Open EIP Builder: right-click the CPU module in the system configuration area point to Communication Software and then click EIP Builder . If EIP Builder is not available, check if the current communication is via EtherNet in ISPSoft. 9.4.2 Set up the IP Address This section provides an overview of how to set up IP address for AS Series modules. Set up the IP address before configuring the EIP related parameters or data mapping settings. 9.4.2.1 IP Address Types The AS Series supports 3 types of IP addressing, BOOTP, DHCP and static IP address.
9.4.2.2 Set the IP Address (Static IP) _9 Steps to set the IP address When using an EIP product with a static IP address, set up the IP address in HWCONFIG in ISPSoft. The following example uses the AS Series. Create Projec t I SPSoft 9-16 Open HWC ONFI G Set up I P Address Dow nload HWC ONFI G Type of IP Address Definition BOOTP Uses the TCP/IP Bootstrap Protocol (BOOTP) to set up the IP address, netmask and gateway. A BOOTP server may require some configuration. The BOOTP protocol is designed for a network in which each host has a permanent network connection.
DHCP Uses the Dynamic Host Configuration Protocol (DHCP) to automatically obtain IP address, netmask, gateway, main computer name and the WINS server. Static IP You manually set the IP address, netmask and gateway.