Chapter 9 Ethernet Specification and Operation Operation Steps: a. After log in, double-click Data monitor setup to open the setting page. 9_ 9-105 Item Description Table name To name your table, you can use up to 16 characters from the following characters, A through Z (case-insensitive ), 0 through 9, (underscore) , (comma) and . (dot) . _ Device quantity Device quantity to be monitored; default: read only Default update cycle Set up the updated cycle time; default: 5 seconds; unit: second “Edit” Click “Edit” to edit the table and the table name column turns “Delete” Click “Delete” to delete the table and its contents.
Device Devices to be monitored; you can enter the following devices to Radix Positional numeral system to be shown on the monitoring page; available formats are Signed decimal, Unsigned decimal, Hexadecimal, Octal, Binary, 32bit Signed decimal, 32bit Unsigned decimal, 32bit Hexadecimal, 32bit Octal, 32bit Binary, 32bit Float and 64bit Double available formats are Signed decimal, Unsigned decimal, Hexadecimal, Octal, Binary, 32bit Signed decimal, 32bit Unsigned decimal, 32bit Hexadecimal, 32bit Octal, 32bit Binary, 32bit Float and 64bit Double Read only Set up the monitored devices to read only or not. Description Add a description here for the table.
“Apply” Click “Apply” to save the settings.