AS Series Operation Manual 9.10.4.2 Data Monitor Table Pages The setting results are shown as below. _9 9-108 Item Description Table name Name of the table; read only Monitor status Status of the monitoring; read only Yellow light: reading, Green light: reading complete, Red light: reading error Update cycle Update cycle time; default is what you set up in data monitor setup page; unit: second “-“ Minus; click once to decrease 1; the minimum value is 1 “+“ Plus; click once to increase 1; the maximum value is 60 Floating format setting Floating point setting; round down; default:
round the number down to three decimal places Device Devices to be monitored; read only Radix Positional numeral system to be shown on the monitoring page; available formats are Signed decimal, Unsigned decimal, Hexadecimal, Octal, Binary, 32bit Signed decimal, 32bit Unsigned decimal, 32bit Hexadecimal, 32bit Octal, 32bit Binary, 32bit Float and 64bit Double Description Add a description here for the table; read only Status Status of bit; read only Green LED: ON; No LED: OFF Value Values in devices to be monitored; read only Signed decimal: K+ Number Unsigned decimal: K+ Number Hexadecimal: H + hex Number Octal: O + octal Number Binary: B + binary Number