AS Series Operation Manual 2.1 General Specifications _2 2-3 Item Specifications Operating temperature -20 to 60°C Storage temperature -40 to 80°C 5–95% No condensation Operating humidity Storage humidity 5–95% No condensation Work environment No corrosive gas exists. Installation location In a control box Pollution degree 2 Ingress protection IP20 (IP ratings) EMC (electromagnetic Refer to Chapter 7 for more information. compatibility) Tested with: 5 Hz ≦ f ≦ 8.4 Hz, constant amplitude 3.5 mm; 8.4 Hz ≦ f ≦ 150 Hz, constant acceleration 1g Duration of oscillation:
10 sweep cycles per axis on each direction of the three mutually perpendicular axes International Standard IEC 61131-2 & IEC 60068-2-6 (TEST Fc) Vibration resistance Tested with: Half-sine wave: Strength of shock 15 g peak value, 11 ms duration; Shock direction: The shocks in each in direction per axis, on three mutually perpendicular axes (total of 18 shocks) International Standard IEC 61131-2 & IEC 60068-2-27 (TEST Ea) Shock resistance Safety Conforms to IEC 61131-2, UL508 Ambient air Operating:
1080 ~ 795hPa (-1000 ~ 2000 m) Storage:1080 ~ 660hPa (-1000 ~ 3500 m) temperature-barometric pressure-altitude Applicable to the removable terminal block, function card slot, SD card slot, Ethernet port, USB port on the modules and the connecting ports between modules. Plugging: more than 100 times (Each plugging in is counted as 1 time and pins inside the slots or ports should not be bent or crooked.) Force used for plugging in: to plug in a removalbe terminal block, the force used is around 70 g and for other slots and ports, the force is around 220 g. Force used for plugging out:
to plug out a removalbe terminal block, the force used is around 1000 g and for other slots and ports, the force is around 20 g. Endurance