Delta Electronics — 10.2.3 Configure the AS-FCOPM with HWCONFIG

AS Series Operation Manual 10.2.3 Configure the AS-FCOPM with HWCONFIG Before using the AS-FCOPM card in an AS300 Series PLC, use HWCONFIG in ISPSoft to configure the AS- FCOPM card. If you are using an AS200 Series PLC, the first two steps can be ignored. 1. You can only install the AS-FCOPM in the card 2 slot as marked in red below. Double click the function card 2 slot to go to the Device Setting dialog box. 2. Select Manual for Card 2 Detect mode and select AS-FCOPM Card for Manual Select Card . 3. Select the working mode, node ID and the bit rate for AS-FCOPM. * Working mode: CANopen DS301 * Node ID: 1 * Bit rate: 125k bps (the default, or you can select your own bit rate) _10 10-6