AS Series Operation Manual 2.7.2 Counting Module Profiles _2 2-63 7 5 1 5 98.3 88 2 6 3 4 75 35 Number Name Description 1 Model name Model name of the module Indicates the status of the power supply POWER LED indicator ON: the power is on (Blue) OFF: no power Error status of the module Error LED indicator ON: a serious error occurs in the module. (Red) OFF: the module is normal. Blinking: a minor error occurs in the module. 2 Counting status of the module OFF: the counter is disabled. Counter LED indicator ON: the counter is enabled but the result of counting is not changed. for Ch1 Act. & Ch2 Act. Blinking: the result of counting is updating. (Green) When SSI input: Blinking:
the counter is enabled and the position value is updating. Input / output LED ON: Receives an input / output signal indicator OFF: Receives no input / output signal Input: connected for pulse input and encoder 3 D-sub 15 Output: connected to loads to be driven Power: providing external encoder +5 VDC 4 DIN rail clip Secures the module onto the DIN rail 5 Module connecting set Connects the modules 6 Ground clip On the DIN reail for grounding 7 Label Nameplate Number Name Description 1 Model name Model name of the module Indicates the status of the power supply POWER LED indicator ON: the power is on (Blue) OFF: no power Error status of the module Error LED indicator ON:
a serious error occurs in the module. (Red) OFF: the module is normal. Blinking: a minor error occurs in the module. 2 Counting status of the module OFF: the counter is disabled. Counter LED indicator ON: the counter is enabled but the result of counting is not changed. for Ch1 Act. & Ch2 Act. Blinking: the result of counting is updating. (Green) When SSI input: Blinking: the counter is enabled and the position value is updating. Input / output LED ON: Receives an input / output signal indicator OFF: Receives no input / output signal Input: connected for pulse input and encoder 3 D-sub 15 Output: connected to loads to be driven Power:
providing external encoder +5 VDC 4 DIN rail clip Secures the module onto the DIN rail 5 Module connecting set Connects the modules 6 Ground clip On the DIN reail for grounding 7 Label Nameplate