RIEVTECH STUDIO SOFTWARE MANUAL Ш Reverse on reaching the end If “ Reverse on reaching the end ” is checked, the operation will be continued at the lower limit and the result will change to add from the lower limit to the upper limit. When the result reached the upper limit, the operation will change to subtract. l Increase The result value will keep increasing if the component of “ Increase ” is pressed down. The increasing will stop if the component of “ Increase ” is released or the value reaches the upper limit. The component of “ Increase ” has attributes of “ Immediately Execute Increase/Decrease Action ” , “ Delaying Time ” and “ Execution Time ” .
Ш Immediately Execute Increase/Decrease Action “ Increase ” and “ Decrease ” all have this attribute. If it is checked, the operation of “ Increase ” or “ Decrease ” will be executed immediately without waiting when the component is pressed down. Ш Delaying Time 132