RIEVTECH STUDIO SOFTWARE MANUAL l Bit Register The component is a bit indicator when “ Bit Register ” is selected. The method to input bit address can be seen in: Detailed manual/General functions/Address editor/Standard Bit Address Input . l Status No. The status of a bit address can be ON or OFF. So it is 2 here in default and can not be modified. l Condition Ш Positive Logic State 0 is OFF and state 1 is ON. Ш Negative Logic State 0 is ON and state 1 is OFF. l Flash Mode It includes three modes: “ None ” , “ Blink Text ” and “ Blink Picture ” . You can select each status in left table and then set the flash mode for the status selected. Ш None It means no flashing.
Ш Blink Text Text can flash in a frequency. Ш Blink Picture Picture can flash in a frequency. l Flash Freq. Picture or text will flash in a designated frequency. The frequency can be a multiple of 0.1 second. Detailed attribute information of the current bit indicator light can be seen in the table at the left bottom. 4.6.2.2Word Indicator Light 152