RIEVTECH STUDIO SOFTWARE MANUAL Select the data type for the current channel according to the actual needs. Ш Remark You can note the name of the curve for the current channel in the “ Remark ” column. For example, channel 1 is noted as "Disc A track". Same as the Trend Curve, selecta channel in the “ Channel Settings ” table, there are many parameters can be set for the selected channel in the following "Channel Setting". The most parameters are same to the settings of the Trend Curve. The option “ Projection along Y-axis Direction ” is added here. The meaning of this option is same tothe "Projection along X-axis Direction" but the direction is different.
TheMinimum Value and the Maximum Value ofthe Y-axis can be set different with X-axis. They can be set by Constant or by Variable. The default range of the Minimum Value and the Maximum Valueis from 0 to 100. The detailed settings can be referred to the "Channel" property TABof the Trend Curve. For the information of the occupied addresses by the current channel, it is depended on the data type of this channel. You can view the text which is noted below the “ Channel Setting ” . It is shown as below. 249