RIEVTECH STUDIO SOFTWARE MANUAL number) save the Channel 1 data, LW3 (Single-precision Floating-point Number) save the Channel 2 data, LW5 (32-bit Unsigned) save the Channel 3 data. Other channelscan be done in the same matter. 4.6.7.3.2 Channel l Channel No. There is 1 channel by default.A “ Data Group ChartDisplay ” component can display up to 16 channels. l From the Start Address, the Sampling Address is Continuous. This option is checked by default. If the register of the “ Sampling No. ” for channel 1 in the “ Channel Setting ” table is set "LW100" and the “ Data Type ” is "16-bit Unsigned", then LW101 is used to save the first sample data, LW102 is used to save the second, and so 255