RIEVTECH STUDIO SOFTWARE MANUAL Ш Search Trigger Bit The option “ Search Trigger Bit ” is used to specify a bit register to trigger the search function. Note that the search function is not edge-triggered mode. When set the trigger bit 1, the alarm list displays the filtered results. After setting the trigger bit 0, the list will display the results which are not filtered. The bit address input method is referred to: Detailed manual/General functions/Address editor/Standard Bit Address Input . Ш Search Register The “ SearchRegister ” is used to specify the first word register address for the search function. The number of the word registers is depending on the search mode.
The function of the word registers used to searchis different for the different search mode. You can get the information of the used word registers according to the text displayed under the first word register address. The word address input method is referred to: Detailed manual/General functions/Address editor/Standard ByteAddress Input . l Export CSV The option “ Export CSV ” is referred to: Detailed manual/ General functions/ Drawing/ Export CSV . 4.6.13.2.4 Display The settings of the “ Display ” property TAB are referred to: Detailed manual/General functions/Drawing/Display .
4.6.13.3 OperatorLog The function of the “ Operation Log ” is to record therequired detailed operation of the HMI device, such as a button is triggeredat a certain time, a value is modified at another certain time, and so on.The “ Operation Log component displaysthe detailed operating records in the list form. You can search the records or export them. Note 1: 312