RIEVTECH STUDIO SOFTWARE MANUAL For example, the “ Recipe Length ” is 10 and the “ Array Formula ” is 1000, so the whole length of the word register addresses occupied by the recipe is 10*1000=10000. The Recipe name is “ RP_Coffee ” . So theaddress range of the word registers is "RPW_ Coffee: 0 ~ 9999". 4.9.1.4.2 Word address index range In the above example, the “ Recipe Length ” is 10 for each group of the recipe. So the Word address index range is "RPWI_ coffee: 0-9." 4.9.1.4.3 Bit address range The bit address range is determined by the word address range. So the bit address in the above example is "RPB_ coffee:
0.0 to 9999.15." 4.9.1.4.4 Bit address index range Similarly, the bit address index range is determined by the “ Recipe Length ” . So the “ Bit address index range ” is "RPBI_ coffee: 0.0 to 9.15." 4.9.1.4.5 Current recipe ID register The “ Current recipe ID register ” is used to specify the group number of the recipe. For the above example, the “ Current recipe ID register ” is “ RPI_coffee: 0 ” .It is a unique register for each recipe. 4.9.1.4.6 UseExternal Address as Recipe index It is not checked by default. If it is checked, you can specify a word address as a recipe ID register and the "Current recipe ID register" (such as "RPI_ Coffee: 0") is not valid.
4.9.1.5 Clear current recipe bit address It is not checked by default. If it is checked, you can specify a bit address.If it isset ON, the current data of the recipe group which specified by the recipe ID register will be cleared. After the data is cleared, this bit address will be reset OFF. It is shown as below. 369