RIEVTECH STUDIO SOFTWARE MANUAL l Server Station No. You can set the “ Server Station No. ” by Constant or Variable. It is the station number of the touch screen as a slave device. Ш Constant The user can input a constant as the fixed station number. Ш Variable You can set the “ Server Station No. ” by variable. It means the server station number will depend on the value of a variable which you can input by a numeric value input component. The method to input the variable address is referred to: Detailed manual/General functions/Address editor/Standard ByteAddress Input . l Communication Setting Ш Communication Type: RS232, RS485-2 and RS485-4 are optional. Ш Baud Rate:
110,300,600,1200,2400,4800,9600,14400,19200,38400,56000,57600,115200 and 187500 are optional. Ш Data Bit: the number 7 and 8 are optional. Ш Stop Bit: the number 1 and 2 are optional. Ш Parity Bit: None, Odd andEven are optional. Ш Reset: the default settings will be restored if you click the button “ Reset ” . Ш Advance: more communication protocol parameters can be modified if you click the button “ Advance ” . The settings are shown as below. 450