RIEVTECH STUDIO SOFTWARE MANUAL The “ At COM port ” refers to the number of COM port which the “ Remote PLC ” device is connected to. The default is COM1. For example, the “ At COM port ” is set COM2 if the accessed controller is connected to the COM2 port. Ш Manufacturer The “ Manufacturer ” refers to the manufacturer of the connected "Remote PLC" device. Ш Device Type The Device Type refers to the type of the remote PLC device which is connected to the remote HMI. Ш Device Alias The default of the Device Alias is "Device1". It cannot be null. You can set a device alias which is easy to understand, such as "HMI for Machine 3". Ш DefaultStation No.
The "Default Station No."refers to the station number of the Remote PLC device. It must be consistent with the actual station number of the Remote PLC device. Ш Advance Please refer to the “ Advance ” settings of the "Local Connection". For example, the “ Remote PLC ” device is connected to the “ Remote HMI ” which the IP address is “ 192.168.0.20 ” . The type of the remote PLC is Siemens S7-200 and the COM1 of the remote HMI is used to connect with the PLC. The station number of the PLC is 2. The settings are shown as below. 458