RIEVTECH STUDIO SOFTWARE MANUAL Certainly, you can use the address tag library. You need to prepare the data addresses in the address tag library before using them. Check the “ Use Address Tag ” in the “ Standard Byte Address Tag ” window and click the button “ ” to open the “ Address Tag Library ” window. Select the byte or word address you need in the address tag library, as shown as follows. You can use the Address Index function. This function can change the byte or word address which is connected with the current component according to the value of a word address. For example, the word address D0 is connected with the current component.
If you check the Address Index and set the address as LW0, as shown as below, the word address which is connected with the current component will beD (0 + LW0). 485