RIEVTECH STUDIO SOFTWARE MANUAL Note: Please use the character component to input the sub directory name if you use registers to provide it. The method to input the register is referred to: Detailed manual/General function/Address editor/Standard ByteAddress Input . ④ Export progress indicator register A register can be given to display the exporting progress if the data is large. It is shown as below. The exporting progress uses the percentage of completion (0-100) to represent. You can use anumeric value display component or a bar graph component to display. ⑤ Export CSV method The Export CSV method can be “ Export by day ” or “ Single File ” .
If you select the “ Export by day ” , the exported data will be saved in different files by date. If you select the “ Single File ” , the exported data will be saved ina single file. If you select “ Single File ” , you can use the function of “ User-defined File Name ” . The system will name the exported file according to the default name rules when the option “ User-defined File Name ” is not checked. A register address needs tobe specified to save the file name which is input when it is needed. Please use the character input component toinput the user-defined file name.The file name length is limited to 32 ASCII characters or 16 Chinese characters. Note:
This operation will export all entries in the current condition. If you use the function of “ Enable Search Function ” , the current result of searching will be exported. 5 Use topic 5.1 Find and Replace 544