4.3 Sliding Rail Kit for Rack Mounting 26 EM2100 Installation Guide 20569-000 Rev. A Figure 4-7. Fastening Sliding Tracks to the Rack Posts (Left Assembly Shown) 1. Position the sliding track so the front and rear outer L-brackets are on the outer faces of the front and rear rack posts at the desired mounting location [1]. Temporarily secure the sliding track to the rack post (using a clamping device or other means). 2. Place an inner L-bracket [2] on the inner face of the front rack post. 3. Secure the front outer L-bracket to the front rack post using the inner L-bracket with two M5x8 screws [3], at the middle and bottom holes at the U-location. Torque each screw to 4.5 ft-lb (6 N∙m). 4.
Repeat Step 2 and 3 for the L-brackets at the rear rack post. 5. Repeat Step 1 through Step 4 for the remaining track. 6. Check that both sliding tracks operate smoothly, they do not bind, and are are level and straight.