NOTE: If running MobilePlanner from an Operator account, the interface will look slightly different than above. By default, the Fleet, Config, and Map buttons have checkmarks indicating those fea- tures will automatically load when you connect to the AMR. 2. In the Connect field, enter the IP address of the AMR, then click Connect . 3. Enter User Name and Password in the User Name and Password dialog box, then click OK . NOTE: If the SetNetGo button is checked, this User Name and Password dialog appears. A login dialog appears in which you must enter a user name, password, and AMR server IP address. NOTE: After connecting to the AMR the first time, MobilePlanner remem- bers your user name.
When connecting to the AMR again, you can select your user name from a combo box instead of having to re-enter, but you must still enter your password. MobilePlanner completes its connection to the AMR. At this point, there is no map to load, so MobilePlanner opens with a blank map window. 20569-020 Rev. A Fleet Operations Workspace Core User's Guide 43