••• ROLAND A-33 TURBO FACTS ••• The A-33 is a versatile 76-note master keyboard which • Selecting Tones with Program Change 1) Press EDIT followed by SELECT/LOWER if it is not lit. 2) Press PROGRAM CHANGE (also labeled 15). 3) Use the buttons numbered 1 through 0 (labeled under the buttons) to select your Program Change number. To call up Synth Strings, press 5 followed by 1. 4) Press ENTER to send the message. 5) Activate the KBD MODE/ UPPER and LOWER buttons to create a layer of Piano and Strings. combines advanced MIDI control with user-friendly functions. This professional quality controller can run on batteries or AC power.
It offers a semi-weighted action, two key zones for creating layers and splits, dedicated buttons for changing octaves, programmable transposition, and 64 Patch locations (32 user and 32 preset). In addition to the new preset Patches, the A-33 also has several new features including keyboard velocity scaling, external inputs for both sustain and expression pedals, and two selectable MIDI outputs. It has a new button layout which makes it easy to use and it comes in an attractive black finish. • Selecting Variation Tones with Bank Select 1) Press EDIT followed by SELECT/LOWER if it is not lit. 2) Press CC00 (also labeled 13). 3) Use the buttons numbered 1 through 0 to select your Bank value.
(Depending on the sound module, variations of Synth Strings are found using a bank select 0 value of 8, 64, and 65). 4) Press 8 followed by ENTER to send the bank select message. 5) Press ENTER again to re-send program change 51, or select a new Program Change number and press ENTER to send the message. • Initialize 1) Hold WRITE and turn the power on. • Selecting Patches 1) Connect a MIDI cable from the A-33’s MIDI OUT to the MIDI IN of a sound module (preferably a GM/GS module such as the MGS-64). 2) Press PATCH A and use the PATCH buttons to select Patches 1-16 (The Patch numbers are labeled above the buttons).
3) To select the second set of 16 Patches, press PATCH B, and use the PATCH buttons 1-16. • Data Entry Slider 1) The Data Entry Slider can be assigned to any of the 127 Controllers. Currently it controls volume for the lower Strings Part. 2) Press EDIT followed by SELECT/LOWER. 3) Press DATA ENTRY ASSIGN. 4) Use the buttons numbered 1-0 to select the desired controller number. For example, 91 will control Reverb level. 5) Press ENTER. The Data Entry Slider will now send the controller information over the selected Part’s MIDI channel. • Creating a Layer or Split 1) Select Patch A-1.
KBD MODE/UPPER will light and a program change message for a Piano (if your module is General MIDI compatible) will be assigned to channel 1. 2) Press KBD MODE/LOWER to layer a Bass (GM), on channel 2, with the Piano. 3) Press KBD MODE/SPLIT to split the UPPER and LOWER. The Piano and Bass will split between the E and F below middle C. • Writing Patches 1) Press PATCH A or B (under Mode) to select the desired Patch group. 2) Hold WRITE. 3) Press the desired Patch button (1-16). • Changing the Split Point 1) Using the same Patch, hold SPLIT. 2) While holding SPLIT, press the key where you want the split point.
• Sequencer Start/Stop The A-33 can START/STOP and control the tempo of an external MIDI sequencer. 1) Connect the MIDI OUT of the A-33 to the MIDI IN of the sequencer. Set your sequencer to sync to MIDI Clock. 2) Assign the Data Entry Slider to #129. The slider will now control the tempo of your sequencer (the default tempo is 120 BPM). 3) START/STOP will start and stop your sequencer and the tempo setting can be stored as part of the Patch. • Changing Octaves & Transposition 1) Press SELECT/UPPER and use the OCTAVE UP and DOWN buttons to change the octave of the Piano Part. (There is a five octave range available). 2) Press SELECT/LOWER and repeat this procedure for the lower Part.
3) Pressing TRANSPOSE will transpose the entire keyboard up a half step. 4) To set the transpose to a different interval, hold TRANSPOSE and press a key up to an octave above or below middle C. TBS50 © 1996 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20044 9/96 NQPSMTR® 6J3@2C5 @?EC@==6C