ROLAND — Back Cover

••• BOSS DR-5 TURBO FACTS ••• The DR-5 Dr. Rhythm Section is a programmable backing section including drum, bass and keyboard sounds. It uses "fret-board" buttons and guitar chord macros to program its 4-track sequencer. The DR-5 includes 256 CD-quality sounds, 64 rhythm kits, 200 preset and 200 user patterns of up to 4 bars each, each pattern with three instrument tracks and a drum track. There are 20 song locations with up to 250 parts per song. It has a guitar-in jack with speaker simulation, a tuner, and the ability to program instrument lines from guitar, and single or double footswitch options for live performance. • Playing Rhythm Kits 1) Press the button labeled KIT.

2) Use the DATA DIAL to select one of the 64 kits. 3) The TRACK SEL button switches between the drum track and 3 instrument tracks. Play the pads to hear the sounds. • Playing Chords from Pads 1) Press TRACK SEL until TRACK 1 is selected. 2) Press CHORD ON to the right of the instrument pads. CHORD will appear in the display. 3) Select a chord root by holding down a note letter pad on the bottom three rows of pads. 4) Now tap on the different chord type pads on the top three rows and you will hear the chords. • Initializing 1) Hold down both FRET keys while powering on. 2) Press ENTER twice. • Creating a Song • Playing the Demo Song 1) Hold the SHIFT button and press SONG.

2) Use the DATA DIAL to select song number 01. 3) Press the red REAL/STEP button two times to enter recording standby for step time write. 4) If the PART display does not say PTN use the CURSOR to select it and use the DATA DIAL to change it to PTN. 5) Now use the CURSOR > button to select a pattern, then use the DATA DIAL to select the first pattern that you want to use for your song.* 6) Once you have selected the pattern press ENTER. The upper number in the PART display will advance to 002?, and wait for a second part. 7) Repeat steps 5) and 6) several more times adding more pattern parts to your song.

9) Press REAL/STEP to exit record mode, then press the START button to hear your masterpiece. *HOT TIP - when the pattern number on the top line ends in a question mark you can experiment with different patterns without recording them - use the Start and Stop buttons to hear parts before pressing Enter. 1) Turn the DATA dial to CIRCUS. 2) Press START to hear the Demo Song. (Press STOP and use FWD or BWD to select specific demo parts, press START to resume.) • Playing Preset Patterns 1) Hold the SHIFT button and press PTN. 2) Press START. 3) Turn the dial to select additional patterns.

• One-Button Fill and Variation The BOSS DR-5 can play a pattern, fill to variation, and fill to the original pattern—each with the press of a single button. Each pattern is normally four bars long, placing 16 bars in your control with no repeats or programming! Note: preset patterns are named in sets of four by bank and number, i.e. Rock11, Rock12, Rock13, Rock14, to group them for this feature. 1) Press STOP, then hold SHIFT and press PTN. 2) Turn the dial to select number1 in any pattern group (such as Pattern 004 is Rock21). 3) Press START and pattern will begin to play. 4) Use VAR, FTO, and FTV buttons to choose between the four patterns in the group.

START/VAR toggles between the Original pattern (#1) and the Variation pattern (#3). FTV (pattern #2) is Fill To Variation. FTO (pattern #4) is Fill To Original. • Amp Simulation and Tuner The DR-5 has a Guitar In Jack with a built in speaker simulator and a tuner. 1) Plug a guitar into BOSS distortion pedal, then into the back of the DR-5. 3) Hold SHIFT and press the GTR IN pad. 4) Use the DATA Dial to select AMPSIM. 5) To tune guitar, hold SHIFT and press TUNER. TBS04 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles CA 90040 Faxback # 20004 12/95 % C %9JE9> &64E:@?