ROLAND — Back Cover

• Compu-Mixing Compu–Mixing turns the JV-90’s sliders into an automated MIDI mixer, controlling the volume and pan information of your sequence tracks. MIDI Internal/External Switch (cont.) program changes, volume changes, etc. 2) Subsequently, when set to EXT, the V-EXP MIDI In bypasses the JV-90 and the display is not updated when MIDI data is received. 1) Record a sequence, as above. 2) Press TX VOL on the Edit Palette. 3) Press REC and select an empty Track for recording. 4) Press PLAY to start recording, and move the sliders to mix the volume levels. 5) Press STOP and RESET. 6) The sequencer will play back your volume changes.

7) You can do the same with TX PAN, to move the sounds throughout the stereo field. EXPANSION BOARDS There are essentially two kinds of optional expansion boards for the JV-90: Voice Expanders and Waveform Expanders. Voice Expansion Boards These expansion boards increase the JV-90's polyphony, multitimbral capability, the number of sounds, and includes its own effects processor. • The VE-GS1-01 General MIDI/GS compatible board provides 226 new sounds, 28 additional voices of polyphony and 16 more multitimbral parts. • The VE-JV1 board provides 512 sounds (64 of which are not in the internal JV-90 library), 28 additional JV-90 quality voices of polyphony and 8 more multitimbral parts.

Waveform Expansion Boards The SR-JV series Sound Expansion Boards are 8 Megabyte libraries of new sounds. These sounds are grouped by style. Currently, there are four libraries: Pop, Orchestral, Piano, and Vintage Synth. In addition to 8MB of new waveforms, these boards also contain a large library of Patches that utilize the waveforms on the Expansion Board. • VE-JV/GS Voice Expanders In addition to SR-JV80 Expansion Boards, the JV-90 can be expanded with the VE-GS1 and VE-JV1 Voice Expanders, which provide additional polyphony and multitimbral parts. To select Voice Expander sounds: 1) Press V-EXP. 2) Press V-EXP and A in the Patch Group buttons.

3) Use the BANK and NUMBER buttons to select the sounds. 4) Use PART SEL (under Edit Palette) to toggle between Parts 1–8 and 9–16. Cursor between individual Parts. • SR-JV80-01 Pop Expansion Board: Pianos, organs, basses, synth pads and leads—the kinds of sounds typically associated with Pop music. • SR-JV80-02 Orchestral Expansion Board: One of the most accurate collections of virtually every orchestral instrument necessary for composing or performing in this genre. • SR-JV80-03 Piano Expansion Board: Everything from classic Rhodes to stunning grand pianos—Steinway to Bosendorfer. A "best of" collection of the worlds best electric and acoustic pianos.

• SR-JV80-04 Vintage Synth Expansion Board: An amazing collection of all the sounds that defined early synthesis. Oberheim®, Moog®, Hammond®, Mellotron®, and of course, Roland—they're all here with breathtaking realism and playability. • SR-JV80-05 World Expansion Board: Over 255 waveforms that cover an extensive collection of ethnic instruments from around the world. Includes 255 patches using internal and SR-JV80-05 waveforms. • SR-JV80-06 Dance Expansion Board: 255 waveforms and 255 patches for dance music appli- cations such as techno, industrial, acid-house, hip-hop, trance, and more.

Includes phrases, scratch noises, human voice exclamations, beat-loops, vocal samples, TR-808/909, TB-303, SH-101, and more. To select GS Variation Tones: (VE-GS1 only) 1) Press BANK LOW in the Patch Group buttons. 2) Press BANK and NUMBER buttons to select a new Bank. (Not all Banks contain Variations - see a GS Tone Chart) • MIDI Internal/External Switch In order to provide independent access to both the internal sounds of the JV-90 and the V-EXP sounds of either a VE-JV1 or VE-GS1 Voice Expansion Board, there are two MIDI inputs. To allow the two sound sources to be addressed separately the MIDI switch must be set to External.

In External position, the JV-90 sound source will be accessible from the JV-90 MIDI In and the Voice Expansion Board will be addressed only from the V-EXP MIDI In. This concept has the following ramifications: 1) If you're addressing a sound source via the JV-90 MIDI In, the internal processor will update the display when MIDI data is received, i.e. TBS14 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20017 12/95 NQPSMTR® ) IA2?523=6 &J?E96D:K6C