••• ROLAND RA-90 TURBO FACTS ••• The RA-90 is a professional, multi-instrument auto- arranger that provides high-quality accompaniments in virtually any style. Featuring a user-friendly, desktop design, the RA-90's 56 Styles and 128 CD-quality sounds can be accessed easily at the touch of a button, giving you total control of your ensemble as you perform. • Selecting Tones (cont.) 1) Use the SELECT buttons to choose either UPPER, LOWER, M BASS or M DRUM KIT. 2) Use the GROUP button to choose either Group A or Group B. 3) Use the BANK buttons to choose a sound family (Chr Perc, Brass, Reed, etc.) 4) Use the NUMBER buttons to select your tone.
• Initializing The RA-90 has eight MIDI configuration power-up modes. By turning the unit on while holding down the appropriate MIDI SET button, the RA-90 will automatically assign the proper MIDI functions for use with a piano, guitar, keyboard, or accordion. For M DRUM KIT selection, only steps #1 and #4 are needed. • Using User Programs The RA-90 features 64 User Programs that will store front panel configurations for instant recall. These User Programs are preset but can be re-configured and stored by the user.
• Selecting Music Styles There are 56 different Music Styles available on the RA-90 which provide Basic and Advanced accompaniment patterns with two variations (Original and Variation) in a wide variety of musical styles. These patterns change depending on the chord type played (Major, minor, seventh, etc.) and the inversion performed. To store a User Set from the front panel: 1) Press and hold down the WRITE button. 2) While holding the Write button, press the BANK and NUMBER buttons corresponding to the User Program location where you wish to store the setting. 1) Use the BANK buttons to select a Bank. 2) Use the NUMBER buttons to select your style number.
3) Press the VARIATION button to select the Style’s variation pattern (LED will light). 4) Press the ADVANCED button to select the advanced style. (LED will light). To select the various User Programs: 1) Use the SELECT buttons to choose USER. 2) Use the BANK and NUMBER buttons to choose your User Set. • Setting the Split Point 1) Press the MIDI/Select button. 2) Press the MIDI Part/+ button twice to find the Upper part RX/TX channel. 3) Use the data knob to ensure that this is the same channel your MIDI controller (keyboard, accordian, etc.) is transmitting on. 4) Press the MIDI Part/+ button again to find the Upper part key range channel. The screen will read “Lim Lw( ) Up( )” .
5) Use the MIDI Part/+ button to move to each field and use the Data/Tempo knob to adjust the values for the Lower and Upper limits of the Upper part range. 6) Follow this same procedure for the Lower part. The Lower part can be accessed by continuing to press the MIDI Part/+ button. 7) By assigning both the Upper and Lower parts to the same MIDI channel and making the Upper range from C4 to C9 and the Lower range from C0 to B3, you will have created a Split. Each Style also has an Intro, an Ending, a Fill To Original, and a Fill To Variation. 1) Press the INTRO/ENDING button before the Style has begun. This will trigger an introductory passage followed by the beginning of the style.
2) Pressing the same button while a style is playing will trigger an ending passage after which the style will end. 3) Pressing the FILL TO ORIGINAL/VARIATION button will trigger a passage followed by a change in style. • Selecting Tones The RA-90 will allow you to select a tone for the Upper, Lower, Manual Bass and Manual Drum parts. The following buttons are found in the TONE/USER PROGRAM section: TBS24 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20022 12/95 NQPSMTR® %2 %62=E:>6 2CC2?86C >@5F=6