ROLAND — Back Cover

••• ROLAND SC-33 TURBO FACTS ••• Ideal for use with a digital piano or MIDI studio, this desktop module has 226 sounds, many of which are unique to the SC-33 (found on no other Sound Canvas!). Similar in features and design to the DS-330 Dr. Synth, the SC-33 has an additional Sound FX kit and conforms to the stringent Roland GS standard. • Create a split patch 1) Select Piano 1-1 by pressing the PIANO button. 2) Press the SPLIT button. 3) Any note below F3 will be Acoustic Bass 5-1 and the upper part will be Piano 1-1. 4) To alter the split point or change the lower instrument, press the LOW/SUB> button and continue pressing it to go through the parameters.

• Initializing 1) Power on while holding REVERB and SPLIT. 2) Press the up arrow/YES button. • Creating a Layer Patch 1) Select Piano 1-1 by pressing the PIANO button. 2) Press the DUAL button. 3) Now, Piano 1-1 will be layered with Strings 7-1. 4) To change the layer instrument and its level, press the LOW/SUB> button and continue pressing it to go through the parameters. • Playing the Demo Song 1) Hold down the DRUMS and ( ( • ) ) buttons while powering-up. 2) Press the up arrow, YES button. The song Worm Hole will play. 3) Press the down arrow, NO button to stop the demo song. 4) Press EXIT to return to single play mode.

• Fattening the Sound 1) Select Piano 1-1 by pressing the PIANO button. 2) Press the FAT button. 3) Playing a note now will actually trigger two notes – the one played and the octave below it. • Select an Instrument in Single Mode 1) Simply press any of the 16 tone bank buttons to select a instrument group of your choice. 2) Upon selecting a bank, use the NUMBER up and down buttons to select individual instruments. • Changing the Default Patch When a bank is selected, the first tone in that bank is automatically is selected. To change to default tone to your preference, follow these steps: 1) Select Piano 1-1 by pressing the PIANO button.

2) Press the NUMBER up button to select E.Piano 2 1-6. 3) At this point, the "6" should be blinking. Press the PIANO button again.. 4) Press the ORGAN button and then go back to the PIANO bank. It should register as E.Piano 2 1-6. • Auditioning the New GS Tones 1) Depending upon the instrument selected, the VALUE/VARIATION up and down buttons may be used to select new GS variation tones. 2) The PIANO bank has many variations as does the ORGAN bank. You can also find them in the GUITAR, CHR. PERC., BASS, ENS., BRASS and SYNTH LEAD banks. 3) Any of these sounds can be heard by pressing the ( ( • ) ) button. • Creating a Multitimbral Setup. 1) Press the UTILITY button until you see SINGLE Mode.

2) Use the VALUE/VARIATION up button to select MULTI Mode. 3) Press EXIT. 4) You will see the Part/MIDI channel displayed on the lower-right of the screen. 5) To change Parts, press the PART (CH) up and down buttons. 6) Instruments can be selected for each Part by pressing the bank and number buttons. 7) To change MIDI channels for a given Part, press the PART EDIT button until you see Part:Ch, and use the VALUE/VARIATION up and down buttons to select any of the 16 MIDI channels. 8) Press EXIT to return normal Multi play mode. • Selecting a Drum Kit 1) Press the DRUMS button. 2) Use the VALUE/VARIATION up and down buttons to select any of the 8 drum kits.

3) The sounds in each kit can now be played directly from the 16 instrument buttons, which are now drum pads. 4) To exit DRUMS mode, press the DRUMS button. TBS27 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20024 12/95 NQPSMTR® & &@F?5 2?G2D & @5F=6