ROLAND — Back Cover

••• BOSS SP-202 TURBO FACTS ••• The SP-202 Phrase Sampler is a powerful new instrument that is perfect for DJs, Musicians, and Broadcast Professionals. Some of the features include: • 32 seconds of internal memory (at Hi Fi setting) • Memory expandable with optional SmartMedia cards. • Filter, Ring Modulator, and Delay effects • Tap Tempo allows loops to be synchronized by BPM • Realtime Time stretch function to allow adjusting the speed of a loop without affecting the pitch. • 8 pads (x 4 banks w/ card) to trigger sample playback • Independent Sample rates for each sample • Built-in microphone • Battery power for portable operation. • Low Retail Price of $395.00.

• Applying Effects to a Sample 1) Press the PAD for the sample you wish to effect. 2) Press an effect button (i.e. Filter) and use the control knob to adjust the effect as desired. • Mixing in external Sound Sources You can mix an external signal (MC-303, VT-1, turntable, etc.) with the SP-202: 1) Set the Source Select switch to LINE. 2) Set the Source Mix switch to ON. 3) Plug the output of the external device into the LINE IN jacks on the back of the SP-202. 4) Press REC and use the CONTROL KNOB to set the level of the external device. 5) Press CANCEL to return to the SP-202 sounds. • Playing a Sample The SP-202 is shipped with samples in Bank A 1-8.

Use the following procedure to listen to the samples: • Auto Sampling a Loop You can preset the tempo of a beat loop so that when it is sampled, the loop points will be automatically set: 1) Connect the unit to an amp, audio system, or headphones. 2) Press PAD 1. The PAD will light up and the sample will play back. 3) Press additional pads to listen to the other sounds. 1) Connect a source (MC-303, CD, turntable, etc.) to the SP-202 input. 2) While holding CANCEL, press REC. 3) Use the CONTROL DIAL to set the recording threshold (0-8) and press REC. 4) Press REC and the next available PAD will blink. 5) Play your source and use the CONTROL DIAL to set the level in the SP-202.

6) If you know the BPM of the loop, use the UP/DOWN ARROWS to set the BPM, or, press the TAP button in time with the beat to determine the BPM setting. 7) Stop the source signal. 8) Press REC to place the SP-202 in standby mode. 9) Start playback on the source. 10) Press REC after 1 or 2 measures to stop recording. 11) Press the PAD button to playback the beat. It should be looped correctly. • Sampling with Built-In Microphone Use the following procedure to record a sample with the built in Microphone: 1) Set the Source Select switch to MIC. 2) Press the REC button. It will start to blink and the next available empty bank will flash.

3) Use the control knob to adjust the input volume so that the gain LED blinks occasionally while you are speaking. 4) Press the REC button and speak into the microphone. 5) Press the REC button to stop sampling. 6) Press the PAD to play back your sample. • Initializing the SP-202 CAUTION: This procedure will erase all of the internal samples: • Playback Settings Use the following procedure to set the playback parameters for your sample: 1) Hold down CANCEL and press DEL. 2) Press the A/B button. 3) Press DEL. 1) Press the desired PAD to play back the sample. 2) Press the TRIGGER/GATE button to select the triggering options.

3) Press the LOOP/ONE SHOT button to select looping or single shot playback. 4) Press the NORMAL/REVERSE button to select the playback direction. The SmartMedia Cards are available in 2 and 4 megabyte versions; SM-2 ($35.00 retail) and SM-4 ($60.00 retail). Contact your local Authorized Roland dealer to order these cards. TBS68 ©1997 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20066 11/97 @DD® &# #9C2D6 &2>A=6C