ROLAND — Back Cover

••• ROLAND VS-840 TURBO FACTS ••• The VS-840 is a complete, all-in-one digital studio. It is an 8 track, non-destructive disk recorder and editor with the ability to cut, copy, and move tracks. Each song contains 64 Virtual Tracks, 8 Scenes, 1000 Markers, and 999 levels of UNDO. Other features include: • Records all audio and mix information on low-cost, removable 100MB Zip™ disks providing up to 103 track minutes of recording time on each disk.

• New “EZ Routing” feature guides users step-by-step through basic operations such as recording, mixing, and bouncing tracks • “Song Arrange” feature allows users to quickly and easily reorder song data (choruses, verses, etc.) without having to perform multiple edits. • 12 channel digital mixer with up to 24 bands of EQ • Dedicated guitar input • Onboard stereo digital multi-effects processor includes Reverb, Delay, Chorus, COSM Guitar Preamp/Speaker Simulator, and more.

• Built-in MIDI TIME CODE (MTC), MIDI Machine Control, and MIDI Clock capabilities • Compatible with VS-880 Digital Studio Workstation • Changing the EQ Settings Use the following procedure to adjust the EQ settings of the drums: 1) Press ZERO followed by PLAY. Pull down all faders except for 7/8 and move the 7/8 fader to 0dB. 2) Press the EQ button (in the Channel Parameter section). 3) Press RIGHT CURSOR to select channel 7/8. 4) Use the TIME/VALUE dial to turn the EQ switch on. 5) Press DOWN CURSOR to highlight “Mid Gain.” 6) Use the TIME/VALUE dial to boost or cut levels as desired. 7) Press DOWN CURSOR to highlight “Mid Freq.” 8) Use the TIME/VALUE dial to change the frequency.

9) Press STOP and move all the faders to 0dB. • Using the Internal Effects Processor The VS-840 has a built-in effects processor that contains over 200 different effects presets. To listen to some of the guitar effects: 1) Hold SHIFT and press TRACK STATUS 3. 2) If necessary, use the CURSOR buttons to select “TRACK 3” and use the TIME/VALUE dial to select “V-TRACK 3.” 3) Press ZERO followed by PLAY. You should hear a dry guitar part. Press STOP.

4) Press EFFECT and use the DOWN CURSOR and TIME/VALUE dial to select “CH 3 Insert.” 5) Press RIGHT CURSOR to highlight “TYPE” and use the TIME/VALUE dial to select “Guitar Multi 1.” 6) Press RIGHT CURSOR to highlight “PATCH” and use the TIME/VALUE dial to select “A-80 ROCK LEAD.” Press ENTER. 7) Press ZERO followed by PLAY to listen to the effect. 8) Use the TIME/VALUE dial to select different effect Patches and press ENTER to hear the selected effect. • Loading the Demo Song 1) Press UTILITY and use the CURSOR buttons to highlight the SONG icon. Press ENTER. 2) Use the CURSOR buttons to highlight the SELECT icon and press ENTER.

3) Press UP CURSOR to highlight the first demo song, “Mercy Blue.” 4) Press ENTER and “Select SONG Sure” will be displayed. 5) Press ENTER and “Store Current?” will be displayed. 6) Press NO and the demo song will begin loading. • EZ Routing EZ Routing guides beginning users through basic recording procedures such as recording, track bouncing, and mix down. For this example, we will use EZ Routing to setup the VS-840 to record a guitar on track 3 from input 1, with effects. 1) Connect your guitar to the GUITAR (Hi-Z) input on the VS-840. 2) Press EZ ROUTING. 3) Use the CURSOR buttons to highlight the RECORDING icon and press ENTER. “Edit Routing” will be displayed.

4) Press RIGHT CURSOR followed by ENTER. 5) Use the CURSOR buttons to select “Track 3” and the TIME/VALUE dial to select the desired V-TRACK. 6) Press ENTER and the “Input Select” page will be displayed. 7) Press ENTER and the “Recording Track Destination” page will be displayed. 8) Use the LEFT CURSOR button to select “CHANNEL 1” and the TIME/VALUE dial to select “3.” 9) Press ENTER and the “Channel Pan” page will be displayed. 10) Press ENTER and “Use Effect?” will be displayed. 11) Press RIGHT CURSOR followed by ENTER and use the TIME/VALUE dial to select “TYPE: Guitar Multi 1.” 12) Press DOWN CURSOR, use the TIME/VALUE dial to select “A-85: STUDIO LEAD” and press ENTER twice.

13) Use the TIME/VALUE dial to select “CH 1 INSERT.” Play your guitar to hear the effect (use the INPUT SENS 1 knob to adjust the level). 14) Press ENTER followed by DISPLAY. The VS-840 is now setup for recording. NOTE: If “Mercy Blue” is already selected, “Re-Load Current?” will be displayed in step #4. Press ENTER and the demo song will begin loading. • Mixing the Demo Song The transport controls on the VS-840 are located in the lower, right section of the front panel. They operate in the same manner as a tape deck or CD player. The ZERO button will return you to the beginning of the song.

1) Move the TRACK and MASTER faders all the way up and down and then back to 0dB (the thick line approximately two-thirds of the way up). 2) Press ZERO followed by PLAY. 3) Move the faders to adjust the levels of the tracks. • Playing the Virtual Tracks of the Demo Song Refer to the “Mercy Blue” Track Sheet (included with the unit) for a list of the available Virtual Tracks. This example will access the Virtual Tracks on Channel #3. 1) Press STOP. 2) Hold SHIFT and press TRACK STATUS 3. 3) Use the TIME/VALUE dial to select “V-TRACK 3.” 4) Press ZERO followed by PLAY to hear a different guitar part for the intro. 5) Press STOP when you are finished. NOTE:

This song is protected and will not go into record mode. TBS70 ©1998 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20069 1/98 NQPSMTR )&   ' &'F5:@ H@C